Monthly Payment Disclaimer
CloseThe values presented on this site are for estimation purposes only. Your actual payment may vary based on several factors such as down payment, credit history, final price, available promotional programs and incentives. Applicable tag, title, destination charges, taxes and other fees and incentives are not included in this estimate.
Dealer Spike is not responsible for any payment data presented on this site. Please verify all monthly payment data with the dealership’s sales representative.
- Pre-owned
- Sold
- 207183
- Tractor
- Row Crop
2022 John Deere 8R Series 8R 410
- Pre-owned
- 207183
- 2022
- John Deere
- 8R Series 8R 410
- Tractor
- Row Crop
- MJDXL09.0333
- PowerTech™ 9.0 L (B20 diesel compatible)
- John Deere
- Rated: ECE-R120 - 302 kW (410 hp) | Maximum: ECE-R120 - 326 kW (443 hp)
- At 1600 rpm: 1851 Nm (1365 lb-ft) | Rise: 40%
- 2100 rpm
- 9 L (549 cu in.)
- 6 / in-line / Wet-sleeve
- Single, variable geometry turbo; air-to-air aftercooling and cooled exhaust gas recirculation
- Level: Final Tier 4 | After treatment type: Diesel oxidation catalyst (DOC)/diesel particulate filter (DPF)/selective catalytic reduction (SCR)
- Diesel
- Independent | 20-spline | PTO actuation: Electrohydraulic with adjustable modulation
- 231 kW (310 hp) | 1,000 rpm | Engine rpm (at rated PTO speeds): e23 PowerShift - 1,000 PTO rpm at 1,995 engine rpm, 1,000 ECO PTO at 1,590 engine rpm, 540 PTO rpm at 1,810 engine rpm | Multispeed PTO option availability: Available - 45-mm (1.75-in.), 1000-rpm and 1000E economy rpm PTO, in-cab shiftable | 44 mm (1.75 in.) 20 spline, 1000 rpm / 35 mm (1.375 in.) 21 spline, 1000 rpm / 35 mm (1.375 in.) 6 spline, 1000 rpm (available dependent on location) | 1,000 PTO rpm at 2000 engine rpm
- e23™ PowerShift™ with Efficiency Manager™ 40K
- Hydraulic power-steering with electric pump back-up
- Inboard planetary three pinion
- Rear axle: Electrohydraulic / Full-locking electrohydraulic | Front axle: 1500 Series MFWD - Full-locking electrohydraulic / ILS - Full-locking electrohydraulic
- 1500 Series MFWD - 1524-3657 mm (60-144 in.) / ILS - 1524-3657 mm
- 1500 Series MFWD - 1524-3657 mm (60-144 in.) / ILS - 1524-3657 mm
- 12 V
- Type of bulb in headlight (Halogen, Zenon, LED): halogen, 65 W | Total cold cranking amps: 1,850 CCA
- 200 amp
- Closed-center, pressure/flow compensated system with load sensing
- Available at a single rear SCV: 1.3-cm (1/2-in.) couplers - 132 L/min (35 gpm) / 1.9-cm (3/4-in.) coupler - 159 L/min (42 gpm) | Available flow at front SCVs: 96 L/min (25 gpm)
- Rated output: 85-cc pump - 227.1 L/min (60 gpm)
- wet-sleeve cylinder liners with four valves in head
- Category 4N/3 / 3N | Drawbar: Category 3
- Degree of seat swivel, left hand 25 degree (angle) / Degree of seat swivel, right hand 40 degree (angle) / Standard: air suspension
- Radio: AM/FM stereo with weatherband, remote controls, auxiliary input jack, four speakers and external antenna
- Rear power take-off (PTO) type: 44 mm (1.75 in.) | Multispeed PTO option availability: Available - 45-mm (1.75-in.) | CommandCenter™: 25.4 cm (10 in.) | Cab glass area: 6.52 m2 (70.18 sq ft) | Front axle center: MFWD - 686 mm (27 in.) / ILS - 590 mm (23.2 in.)
- Maximum: 4735 mm (186 in.)
- 6,636 mm (261.3 in.)
- without brakes: ILS with 380/85R34 group 42 tires at 152.4-cm (60-in.) spacing - 5.77 m (18.9 ft) / ILS with 600/70R30 group 43 tires at 187-cm (74-in.) spacing - 6.14 m (20.1 ft)
- MFWD: 3,080 mm (121.3 in.) | ILS: 3,050 mm (120.1 in.)
- Drawbar clearance: 376 mm (14.8 in.)
- Inner cab: 3.24 m3 (114 cu ft)
- Crankcase volume: 1500 MFWD - 27.6 L (7.3 U.S. gal.) / ILS - 25.8 L (6.8 U.S. gal.)
- Tank: 727 L (192 U.S. gal.) / CTIS - 651 L (172 U.S. gal.) | Diesel exhaust fluid (DEF) tank: 37.2 L (9.8 U.S. gal.)
- Rear (SAE designation): at 610 mm (24 in.) behind hitchpoint - 9072 kg (20,000 lb) | Maximum behind lift points: (at 610-mm [24-in.] behind hitch point) - 12,124 kg (26,729 lb) | Category 3N ground-engaging front hitch: 5200 kg (11,464 lb) | at full height: 2,486 kg (5469 lb) measured at 800 mm (31.5 in.) ahead of pivot
- Maximum vertical: Dependent on drawbar position - 1837 to 2700 kg (4050 to 6000 lb)
- 42.3 L (11.2 U.S. gal.)
- Transmission-hydraulic system: 1500 MFWD - 184.6 L (48.8 U.S. gal.) / ILS - 207.2 L (54.7 U.S. gal.)
- Base machine: ILS™/e23 - 12,700 kg (28,000 lb) | Maximum ballast level: 20,000 kg (44,100 lb) | Maximum permissible: 20,000 kg (44,100 lb)
- Working: 18 halogen
- Number of rear selective control valves (SCVs): 1.3-cm (1/2-in.) ISO couplers - 4SCV control: Electronic | Sensing type: Electrohydraulic | Rear axle type: Rack-and-pinion, double flat, or flange axles | Front axle type: ILS | Display: 4600 Generation 4 | Loader: H480 | Guidance: Integrated AutoTrac™ | Telematic: JDLink™ hardware standard, activations, and Ethernet harnesses (availability dependent upon destination) | Remote diagnostics: JDLink hardware standard
Recommendations
Advertised pricing excludes applicable taxes title and licensing, dealer set up, destination, reconditioning and are subject to change without notice. Pricing may exclude any added parts, accessories or installation unless otherwise noted. Sale prices include all applicable offers. Not all options listed available on pre-owned models. Contact dealer for details.